High-Performance ARGB CPU Air Cooler with Silent RGB Cooling Fan

Black ARGB CPU Air Cooler. Ø 12 cm Silent Fan. Intel LGA & AMD AM/FM Universal Socket. Direct Heat Pipe Contact. The High-Performance Cooler That Fits Every Major Current and Previous Generation CPU Platform.

The High-Performance ARGB CPU Air Cooler is a Black direct heat pipe contact tower cooler with a Ø 12 cm (120 mm) silent ARGB fan, compatible with Intel LGA 1150, 1151, 1155, 1156, 1200 and 2066 sockets and AMD AM2, AM3, AM4, FM1 and FM2 sockets. Ten CPU platforms. One cooler. One included mounting kit. No separate bracket purchase required for any of the listed socket standards. The Ø 12 cm ARGB fan delivers the airflow the heat pipe fin stack requires at silent RPM levels — maintaining full CPU clock speed under sustained gaming and workstation load without the acoustic compromise that high-performance cooling usually demands.

Ø 12 cm Silent ARGB Fan + Direct Heat Pipe Contact + 10-Platform Universal Socket Compatibility + Black Build Aesthetic: The Four Specifications That Make This the Most Universally Compatible and Acoustically Optimised ARGB CPU Air Cooler.

The Ø 12 cm (120 mm) silent ARGB fan is the industry-standard fan diameter that provides the best balance of airflow volume, static pressure and acoustic efficiency — the 120 mm blade sweep area moving the volume of air the heat pipe fin stack requires at RPM levels that remain below the audible noise threshold during sustained CPU load, with the ARGB LED ring producing addressable RGB lighting output that connects to any motherboard ARGB header for software-controlled colour and effect management. The direct heat pipe contact places the copper heat pipes in direct physical contact with the CPU integrated heat spreader across all ten supported socket platforms — the direct contact base eliminating the aluminium base plate thermal resistance that standard tower designs impose at the CPU contact point, reducing the temperature delta between the CPU IHS and the heat pipe fluid that carries heat to the fin stack, and allowing the Ø 12 cm ARGB fan to maintain thermal performance at lower RPM than a base plate design of equivalent fin density requires. The 10-platform universal socket compatibility covers Intel LGA 1150, 1151, 1155, 1156, 1200 and 2066 alongside AMD AM2/AM3, AM4, FM1 and FM2 — the included mounting hardware kit providing every bracket, backplate, standoff and fastener required for direct installation on any of the ten listed socket standards without a separate compatibility kit purchase. The Black build aesthetic integrates the cooler into Black-themed builds through the Black fan frame, Black fin stack coating and Black mounting hardware — with the ARGB fan ring providing the colour accent that the build’s ARGB theme controls rather than imposing a fixed colour that conflicts with the rest of the system lighting.

Everything That Makes This Your Essential Black ARGB CPU Air Cooler for Intel and AMD Builds

• Ø 12 cm ARGB fan — 120 mm silent airflow, addressable RGB, motherboard header compatible
• Direct heat pipe contact — copper pipes touch CPU IHS, no base plate resistance layer
• Black — Black fan frame, Black fin stack, Black mounting hardware
• Intel LGA 1150 / 1151 / 1155 / 1156 — previous and current gen Intel mainstream sockets
• Intel LGA 1200 — 10th and 11th generation Intel Core compatible
• Intel LGA 2066 — Intel Core X-Series HEDT platform compatible
• AMD AM4 — Ryzen 1000 through Ryzen 5000 series compatible
• AMD AM2 / AM3 — previous generation AMD Phenom and Athlon compatible
• AMD FM1 / FM2 — AMD APU platform compatible
• Mounting hardware included — all brackets, backplates and fasteners for all 10 sockets
• Thermal paste included — installation-ready, no separate compound purchase

Because a Ø 12 cm Silent ARGB Fan That Fits Intel LGA 1150, 1151, 1155, 1156, 1200, 2066 and AMD AM2, AM3, AM4, FM1 and FM2 Is Not a Cooler for One Build. It Is a Cooler for Every Build in the Household, the Workshop or the LAN Party That Uses Any of Those Ten CPU Platforms.

Identify the CPU socket from the list: Intel LGA 1150, 1151, 1155, 1156, 1200, 2066 or AMD AM2/AM3, AM4, FM1, FM2. Select the corresponding backplate and bracket from the included mounting kit. Mount the backplate to the motherboard rear panel. Attach the socket-specific brackets to the four mounting posts. Apply the included thermal paste to the CPU IHS. Lower the Black ARGB tower cooler onto the CPU — direct heat pipe contact base aligns with the IHS. Tighten to even pressure. Connect the Ø 12 cm fan PWM cable to the CPU fan header. Connect the ARGB cable to the motherboard 3-pin ARGB header. Boot. Configure lighting in the motherboard ARGB software. Full clock speed. Silent fan. Black cooler. ARGB lit. Every supported platform.

Product Specifications